PCB Capabilities
Swipe screen to view More| File Type | Gerber RS274D、RS274X | ||||
|---|---|---|---|---|---|
| NC Drill File | X,Y-Axis and Aperture Size | ||||
| Specification | inch | mm | mil | Remarks | |
| Max. Finished Size | 21.26*24.4 | 540*620 | |||
| Min. Thickness(+/-10%) | One/Two-Sided | 0.008 | 0.2 | 8 | |
| 4L | 0.016 | 0.4 | 16 | ||
| 6L | 0.024 | 0.6 | 24 | ||
| 8L | 0.032 | 0.8 | 32 | ||
| 10L | 0.039 | 1.0 | 39 | ||
| Max. Thickness(+/-10%) | 20L | 0.177 | 4.5 | 177 | |
| Bow and Twist | < 7/1000 | ||||
| Inner Layer | Inner Layer Drilling Isolation Pad | 0.006 | 0.15 | 6 | |
| Min. Distance from Drill to Inner Layer Route | 0.007 | 0.18 | 7 | ||
| Layer to Layer Registration | 0.004 | 0.1 | 4 | ||
| Thinnest Inner Layer CORE | 0.003 | 0.076 | 3 | ||
| Inner Layer Trace Clearance | 0.003 | 0.076 | 3 | ||
| Drill | Min. Aperture Width(Machine Drill) | 0.006 | 0.1 | 6 | Board Thickness 1.0T |
| Min. Aperture Width(Laser Drill) | 0.003 | 0.076 | 3 | ||
| PTH Aperture Width Tolerance | 0.003 | 0.076 | 3 | ||
| NPTH Aperture Width Tolerance | 0.002 | 0.05 | 2 | ||
| Drill Offset | 0.002 | 0.05 | 2 | ||
| Copper Plating | Min. Hole Copper | 0.008 | 0.02 | 0.8 | |
| Aspect Ration | 10 | ||||
| External Later | Min. Conductor Width/Spacing | 0.003 | 0.76 | 3 | Copper Thickness 1 OZ |
| Min. Conductor Width/Spacing | 0.006 | 0.15 | 6 | Copper Thickness 2 OZ | |
| Min. Conductor Width/Spacing | 0.010 | 0.25 | 10 | Copper Thickness 3 OZ | |
| Min. Conductor Width/Spacing | 0.013 | 0.3 | 13 | Copper Thickness 4 OZ | |
| Isolation Annular Ring | 0.004 | 0.1 | 4 | ||
| Trace Tolerance | +/-15% | ||||
| Solder Mask | Min. Solder Mask Dam/Bridge | 0.003 | 0.076 | 3 | |
| Solder Mask Thickness | 0.0006 | 0.015 | 0.6 | ||
| Legend | Min. Conductor Width | 0.005 | 0.13 | 5 | |
| Final Shaping | Hole Widen | +/-0.1mm | |||
| Shaping Tolerance | +/-0.1mm | ||||
| V-CUT | Finished Web Thickness | Common 1/3 | +/-0.05mm | ||
| Offset | +/-0.05mm | ||||
| ICT | AOI, Flying-Probe, Universal Tester | Yes | |||
| Impedance Test | Impedance Tolerance | +/-10% | |||
| Surface Finishing | ENIG/Immersion Silver/Immersion Tin/OSP/Gold Plating/Gold Fingers/HAL/HASL/Selective Partial Enig/Selective Gold Plating/ENEPIG | ||||
| Solder Mask Color | Green，White，Pure White，Black，Red，Yellow，Blue，Violet，Grey，Clear | ||||
| Legend Color | Green，White，Black，Red，Yellow，Blue，Violet | ||||
| Special Treatment | Blind Hole，Resin Plug，Copper Paste Plug，1.2m long PCB，Semicircular Hole，Edge Copper Plating，Countersink Hole，Counterbore Hole，Peelable Film，Carbon Printing，Single Sided Single Layer MCPCB，Single Sided Two Layer MCPCB。 | ||||